PRESS-MASTER 1.0 

PM-1.0

The PRESS-MASTER is a Control Reliable Clutch-Brake System that uses state of the art technology to incorporate press automation features such as Die Protection, Programmable Cams, Tonnage inputs (Strain gauges extra) Job Memory, Job Counters, Brake Monitor, and more.

Clutch Brake Control and Automation:

  • Inch, Single, Continuous, Continuous Set, with optional "Auto" Modes of Operation.
  • Rugged Eight Channel Optical Absolute Encoder with Metal Disks and Shock Mounts.
  • Time Based Brake Monitor with, Warning Limit, Fail Limit, Drift Detection, Motion Detection and Inch Mode Upgrade
  • Four Programmable Die Protection Inputs with Eight modes of Operation and individual cams. By-pass for Die Protection only in INCH mode when using Die Protection.
  • Four Programmable Output Cams.
  • Seven Digit Job Counter (Does not count in INCH mode).
  • Job Memory with "6" Numeric Digits.
  • Expandable Memory with Down Time Recording.
  • One Main Matrix Display 1" x 3".
  • Two Internal Displays for System Diagnostics.
  • Error Messages for Press Diagnostics on Main Display.
  • RS-232 Communication port for uploading software.
  • CAN Communication Port for Expansion.
  • Optional Second Incremental Encoder Input can be used for Shut Height Indication on Main Display.
  • Meets or exceeds all applicable CSA, OSHA and ANSI standards.

 

HOME PAGE | INTRODUCTION | RECENT NEWS | ON LINE BROCHURES | CONTACT US